AI fabric inspection machines
These are automatic inspection machines for fabric that has already left the loom. Industrial cameras and an AI model trained on the mill's own fabric find, classify and mark defects as the roll runs. This is a different step from on-loom inspection, which watches the fabric on the circular or weaving loom: here the check happens at final inspection.

What changes at inspection
Inspection no longer depends on each inspector's eye and fatigue.
One standard
The machine applies the same criteria on every shift and every roll. The model is trained on the customer's samples and keeps learning from operator corrections.
Defects located and marked
Each defect is logged with its position and image, and the system triggers marking on the fabric. A visual map takes the operator straight to the spot.
Report ready
The roll report is generated automatically under the 4-point system, and the data can be sent to ERP or MES.
Less fabric handling
On models with gripper feeding, dust extraction and tension-free air flattening, the fabric enters clean and flat without being stretched.
Available lines
We work with makers of AI inspection machines and recommend a line based on the fabric and the mill's flow.
- Defects and shade variationInspection machines that detect defects and shade variation. Roll to roll, roll to relaxed fabric and relaxed fabric to roll configurations.
- Defect detectionModels dedicated to defect detection, in roll to roll and roll to relaxed fabric configurations.
- Finished-fabric inspection, single or double faceTension-free inspection with back and front lighting, defect marking without stopping the machine, selvedge alignment and a 4-point system report.
- AI kit for greige inspection machinesTension control, infrared selvedge alignment and stretch-free winding added to the existing machine. Linked to on-loom inspection, it can stop the loom the fabric came from when it finds a defect.
- Kit for existing machinesAI inspection system as a stand-alone unit for final inspection or as a kit to upgrade existing manual inspection machines.
- Inspection with automated packingAI visual inspection combined with automated packing, for mills that want inspection tied to the end of the line.
Specifications
- Inspection speed
- Up to 40 m/min on roll to roll machines; above 90 m/min on finished-fabric inspection
- Image capture
- Industrial area-scan cameras with shadowless LED lighting; on finished-fabric inspection, 14 cameras for single face and 28 for double face
- Recognition accuracy
- Up to 0.5 mm on roll to roll machines; defects under 1 mm in diameter on finished-fabric inspection
- Usable width
- Up to 2,450 mm on finished-fabric inspection
- Defect marking
- Triggered within 0.5 s of detection
- Reporting
- 4-point system, export to ERP/MES
- Operation
- Continuous, 24 hours
- Model training
- 2 to 4 weeks on the customer's own fabric
- Supported fabrics
- Cotton and synthetic knits, cotton and synthetic wovens, finished denim
Where it is used
- Greige inspection before dyeing
- Final inspection of knitted fabric
- Inspection of cotton and synthetic woven fabric
- Quality control of finished denim
- Mills that need roll-level traceability
What would you pay with direct shipment?
Send the part number, drawing or a photo of the part. We reply with the source, the total cost and the route to your plant, with service dedicated to your operation.
Also in this industry.
- On-machine AI fabric inspectionAI fabric inspection on the circular knitting machine. It detects the defect and stops the machine on the spot.
- AI inspection on weaving loomsCameras and AI on the weaving loom itself detect the defect as it happens, sound the alarm and stop the loom before the fault runs down the roll.
- Automation and inspection for dyeing and finishingVision, measurement and control systems for stenters, dyeing and finishing: weft, weight, density, moisture, temperature, shade and bath.
- Circular knitting machinesCircular knitting machines: single and double jersey, jacquard and auto stripers, 3" to 64" in diameter.
- Needle break detectorA sensor that watches the needles of the knitting machine, stops it when a needle breaks or bends, and shows the exact position.
- Cylinders for circular knitting machinesNeedle cylinders for circular knitting machines, made to your machine's specification.
- Circular knitting machine spare partsSpare parts for circular knitting machines, to keep your mill running without waiting on the original maker.
- Knitting machine needlesNeedles for circular and flat knitting, socks and gloves. High-alloy steel with controlled heat treatment.
- Knitting machine sinkersSinkers for circular and seamless knitting machines, in certified high-alloy steel with a mirror finish.
- Industrial sewing needlesNeedles for industrial sewing machines: apparel, knits, embroidery, footwear, leather, bags and carpets.
- Vortex yarnVortex-spun yarn from Ne 10 to Ne 60 in cellulosics, polyester, blends and melange. Low hairiness and less pilling.
- Sizing agentsPowder agents for warp sizing, prepared with cold water only, with liquid auxiliaries that replace softeners, antistatics and waxes.
- Automated material handling and storageAGVs, autonomous mobile robots and automated storage systems to move and store materials between the stages of a textile plant.