Sizing agents
We supply sizing agents for preparing warp yarns before weaving. The size is prepared with cold water only, with no cooking and no steam, on the sizing machine the mill already has. There is one agent for coarse yarns and another for fine yarns, and liquid auxiliaries complete the recipe.

What changes in sizing
Cold preparation and no changes to the line.
Cold preparation
The size is prepared with cold water only, with no cooking and no steam. Drying stays as usual.
Works with current equipment
It runs on existing sizing machines, with no modification or special equipment.
Fewer products in the recipe
The liquid auxiliaries do the work of softeners, antistatics and waxes.
Cold-water desizing
The fabric is desized with cold water, without enzymes, and no starch residue is left in the tanks. Leftover size can be stored and reused.
Products
Two main agents, chosen by yarn count, and liquid auxiliaries.
- Agent for coarse yarnsPowder or granule agent for yarns up to about Ne 40/1.
- Agent for fine yarnsPowder or granule agent for fine yarns such as Ne 50/1, 60/1 and 100/1.
- Liquid auxiliariesThey complement the main agent and replace softeners, antistatics and waxes in the size recipe.
Specifications
- Use
- Warp yarn sizing
- Form
- Agents in powder or granules; liquid auxiliaries
- Preparation
- Cold water only, no cooking and no steam
- Fibers
- Cotton, polyester, viscose, linen and blends
- Desizing
- Cold water, no enzymes
- Equipment
- Existing sizing machines, no modification
Where it's used
- Cotton warps, from coarse to fine yarns
- Polyester and blended warps
- Viscose and linen yarns
- Mills that want to take cooking out of size preparation
What would you pay with direct shipment?
Send the part number, drawing or a photo of the part. We reply with the source, the total cost and the route to your plant, with service dedicated to your operation.
Also in this industry.
- On-machine AI fabric inspectionAI fabric inspection on the circular knitting machine. It detects the defect and stops the machine on the spot.
- AI inspection on weaving loomsCameras and AI on the weaving loom itself detect the defect as it happens, sound the alarm and stop the loom before the fault runs down the roll.
- AI fabric inspection machinesInspection machines that check finished fabric with cameras and artificial intelligence, mark defects and produce the roll report.
- Automation and inspection for dyeing and finishingVision, measurement and control systems for stenters, dyeing and finishing: weft, weight, density, moisture, temperature, shade and bath.
- Circular knitting machinesCircular knitting machines: single and double jersey, jacquard and auto stripers, 3" to 64" in diameter.
- Needle break detectorA sensor that watches the needles of the knitting machine, stops it when a needle breaks or bends, and shows the exact position.
- Cylinders for circular knitting machinesNeedle cylinders for circular knitting machines, made to your machine's specification.
- Circular knitting machine spare partsSpare parts for circular knitting machines, to keep your mill running without waiting on the original maker.
- Knitting machine needlesNeedles for circular and flat knitting, socks and gloves. High-alloy steel with controlled heat treatment.
- Knitting machine sinkersSinkers for circular and seamless knitting machines, in certified high-alloy steel with a mirror finish.
- Industrial sewing needlesNeedles for industrial sewing machines: apparel, knits, embroidery, footwear, leather, bags and carpets.
- Vortex yarnVortex-spun yarn from Ne 10 to Ne 60 in cellulosics, polyester, blends and melange. Low hairiness and less pilling.
- Automated material handling and storageAGVs, autonomous mobile robots and automated storage systems to move and store materials between the stages of a textile plant.