Needle break detector
The detector watches the needles of the knitting machine continuously. When it finds a broken or bent needle, it stops the machine at once and shows the exact position. The fix is faster and the defect does not run on in the fabric.

What changes on the floor
The fault is seen when it happens, not on the finished roll.
Immediate stop
The machine stops as soon as a faulty needle is detected.
Breaks and bends
It picks up both broken and bent needles.
Exact position
The system shows which needle failed, so finding and replacing it takes less time.
Clean lens
Automatic, scheduled or manual cleaning, plus autofocus for easy installation.
Specifications
- Detection capacity
- 50 needles per inch
- Reading speed
- 2,500 needles per second, up to 55 rpm
- Response frequency
- 2,500 Hz
- Number of needles
- Up to 5,999, expandable
- Focus
- Autofocus
- Lens cleaning
- Automatic, scheduled and manual
- Power supply
- 24 V AC
- Maximum power
- 3 W (24 V x 120 mA)
Where it is used
- Circular knitting machines
- Knitting mills running non-stop
- Lines that want fewer second-quality pieces
What would you pay with direct shipment?
Send the part number, drawing or a photo of the part. We reply with the source, the total cost and the route to your plant, with service dedicated to your operation.
Also in this industry.
- On-machine AI fabric inspectionAI fabric inspection on the circular knitting machine. It detects the defect and stops the machine on the spot.
- AI inspection on weaving loomsCameras and AI on the weaving loom itself detect the defect as it happens, sound the alarm and stop the loom before the fault runs down the roll.
- AI fabric inspection machinesInspection machines that check finished fabric with cameras and artificial intelligence, mark defects and produce the roll report.
- Automation and inspection for dyeing and finishingVision, measurement and control systems for stenters, dyeing and finishing: weft, weight, density, moisture, temperature, shade and bath.
- Circular knitting machinesCircular knitting machines: single and double jersey, jacquard and auto stripers, 3" to 64" in diameter.
- Cylinders for circular knitting machinesNeedle cylinders for circular knitting machines, made to your machine's specification.
- Circular knitting machine spare partsSpare parts for circular knitting machines, to keep your mill running without waiting on the original maker.
- Knitting machine needlesNeedles for circular and flat knitting, socks and gloves. High-alloy steel with controlled heat treatment.
- Knitting machine sinkersSinkers for circular and seamless knitting machines, in certified high-alloy steel with a mirror finish.
- Industrial sewing needlesNeedles for industrial sewing machines: apparel, knits, embroidery, footwear, leather, bags and carpets.
- Vortex yarnVortex-spun yarn from Ne 10 to Ne 60 in cellulosics, polyester, blends and melange. Low hairiness and less pilling.
- Sizing agentsPowder agents for warp sizing, prepared with cold water only, with liquid auxiliaries that replace softeners, antistatics and waxes.
- Automated material handling and storageAGVs, autonomous mobile robots and automated storage systems to move and store materials between the stages of a textile plant.