Automation and inspection for dyeing and finishing
These are systems that measure and control fabric during finishing, mainly on the stenter. Cameras and sensors track weft, weight, density, moisture, temperature and shade in real time and correct the process without stopping the machine. The modules can be fitted to existing lines.

What changes in finishing
Measurements that used to be spot checks become continuous and tied to machine control.
Fabric weight without cutting samples
The inline scale measures weight and width continuously, with no manual punching that damages the fabric.
Closed loop on the stenter
Cameras at the inlet and outlet read density and adjust overfeed; the scale at the outlet closes the weight control.
Weft and pattern aligned
The image-based straightener reads the full fabric width and corrects weft and pattern skew, printed fabric included.
A record of every batch
The systems keep a measurement history and communicate over Ethernet for remote monitoring and ERP connection.
Product line
Each module handles one point in the process and can be combined with the others.
- Weft and pattern straightenersImaging camera reading the full width, carbon fiber roller for low-tension fabric, and pattern correction.
- Inline fabric weight scaleNon-destructive weighing with width measurement, data history and control together with overfeed.
- Pick and course countingMeasures weft density by image and controls stenter overfeed automatically.
- Moisture, temperature and exhaustResidual moisture at three points, fabric temperature in the dryer, exhaust fan control and air filter monitoring.
- AI defect and shade inspectionDefect detection on the running fabric, with alarm or automatic stop, and inline detection of shade variation.
- Bath chemistryMeasurement and control of dye bath pH and of auxiliary concentration in the stenter padder.
Specifications
- Weight scale, up to 200 gsm
- ±3 g
- Weight scale, 200 to 400 gsm
- ±5 g
- Weight scale, over 400 gsm
- ±1.5%
- Pattern straightener
- Over 8,000 detection points across the full width
- AI inspection, speed
- Up to 120 m/min
- AI inspection, width
- Up to 3,600 mm
- AI inspection, smallest defect
- 0.2 x 0.2 mm, with 0.1 mm image capture
- Auxiliary control, range and accuracy
- 0 to 100%; measurement ±0.01%, control ±0.03%
- Auxiliary control, power supply
- Three-phase 380 V ±10%, 50 Hz, under 2 kVA
Where it is used
- Finishing stenters
- Dye houses
- Rotary and digital printing
- Denim finishing and sanforizers
- Fabric laminating
- Cylinder dryers and sizing machines
What would you pay with direct shipment?
Send the part number, drawing or a photo of the part. We reply with the source, the total cost and the route to your plant, with service dedicated to your operation.
Also in this industry.
- On-machine AI fabric inspectionAI fabric inspection on the circular knitting machine. It detects the defect and stops the machine on the spot.
- AI inspection on weaving loomsCameras and AI on the weaving loom itself detect the defect as it happens, sound the alarm and stop the loom before the fault runs down the roll.
- AI fabric inspection machinesInspection machines that check finished fabric with cameras and artificial intelligence, mark defects and produce the roll report.
- Circular knitting machinesCircular knitting machines: single and double jersey, jacquard and auto stripers, 3" to 64" in diameter.
- Needle break detectorA sensor that watches the needles of the knitting machine, stops it when a needle breaks or bends, and shows the exact position.
- Cylinders for circular knitting machinesNeedle cylinders for circular knitting machines, made to your machine's specification.
- Circular knitting machine spare partsSpare parts for circular knitting machines, to keep your mill running without waiting on the original maker.
- Knitting machine needlesNeedles for circular and flat knitting, socks and gloves. High-alloy steel with controlled heat treatment.
- Knitting machine sinkersSinkers for circular and seamless knitting machines, in certified high-alloy steel with a mirror finish.
- Industrial sewing needlesNeedles for industrial sewing machines: apparel, knits, embroidery, footwear, leather, bags and carpets.
- Vortex yarnVortex-spun yarn from Ne 10 to Ne 60 in cellulosics, polyester, blends and melange. Low hairiness and less pilling.
- Sizing agentsPowder agents for warp sizing, prepared with cold water only, with liquid auxiliaries that replace softeners, antistatics and waxes.
- Automated material handling and storageAGVs, autonomous mobile robots and automated storage systems to move and store materials between the stages of a textile plant.